3C Media Solutions

Support Home | Site Survey Questions | Site Preparation for 3C Media Multicast Streams | Testing Multicast Connectivity | Amino STB Quick Setup

Amino STB Quick Setup

Plug the 10 pin DIN connector into the back of the unit

Plug the 10 pin DIN connector into the back of the unit as shown.

Connect the RCA connectors to the TV set

Connect the RCA connectors to the TV set.

Set up of Anino set-top-box - 1

Connect an Ethernet cable from your data network to the Amino set-top-box

Set up of Anino set-top-box - 2

Plug the AC/DC adapter into an outlet and plug the DC cord into the unit.

Snapshot of website

When the unit finishes booting you should see a screen like the one shown above. If not check your connections and TV inputs.

Clicker

Use the P (program) ‘+’ and ‘-‘ buttons on the Amino remote control to change channels. You can also use the ‘+’ and ‘_’ buttons on the front panel of the receiver. To access the front panel buttons rotate up or down the left front corner cover (refer to page 4 of User Guide).

If you do not see video after a few seconds contact your network administrator and 3C Media Solutions.

PRIVACY

3C Media Solutions is funded by a grant from the Chancellor’s Office, California Community Colleges. 3C Media Solutions is the
delivery system for distance education, training and meeting collaboration, linking the 112 campuses of the California Community Colleges System.
© 2009 3C Media Solutions. All rights reserved.