3C Media Forms
homeAbout 3C MediaProgrammingSolutionsSupportCollaborative Partners
TechnicalUser GuideLegalContact UsVideo PolicyForms

spacer

My YahooXMLSearch

 3C MEDIA SOLUTIONS SYSTEM SET-UP

 

1. Dish must be pointed at:

  • GX-R 123 Deg W Transponder 7K
  • Make sure that the Ku feed is connected to the DSR-4200V Port K/V

 

DSR-4200V Rear Panel Schematics

 

DSR-4200V MANUAL TUNE

2. On remote control select the "options" button

3. Select "Customize Program Viewing"

4. Select "change your password"

  • Enter 996 then push the "TIME" button on your remote control

5. Select "set up"

Highlight and select

  • "Frequency"
  • "LNB"
  • "K/V"
  • "NTSC"
  • "Vertical/RHC"

6. On the remote control push the "go back" button

7. Select "Manual Tune"

1. Enter:

  • Freq: 1105.000
  • Symbol rate: 4.88
  • Code Mode: 7/8
  • Polarity: Vertical

2. Highlight and select "Tune" - Receiver will display "Tuning"

  • "Sat/Tv" light on receiver display should be on
  • When receiver captures the signal: The "signal" light on receiver
    display should be on
  • Channel Display: Ch 80 or 90 on your DSR 4200V front panel display
Faculty CenterStudent CenterStaff CenterCommunity Center

ACCESSIBILITYlSITE MAP.lLEGAL INFO.lDISCLAIMER.lPRIVACY

3C Media Solutions is funded by a grant from the Chancellor’s Office, California Community Colleges. 3C Media Solutions is the satellite
delivery system for distance education, training and meeting collaboration, linking the 109 campuses of the California Community Colleges System.
© 2007 California Community Colleges Satellite Network (CCCSAT). All rights reserved.